Fujitsu fi-6000NS Operator's Manual page 71

4. Select a date format.
This date format is applied to the date/time when it is used to name scan data files and the
date shown on screens.
5. Enter the current date and time in the "Date/Time" input field.
The date and time shown are those current for when the "Date/Time" tab on the left side
menu was selected.
The date/time range that may be entered is from "January 1st 2001, 00:00:00" to "December
31st 2037, 23:59:59".
Pressing the [Get Time] button refreshes the current value of the internal
HINT
system date/time.
6. Press the [OK] button.
⇒
The date and time are set.
An adjustment that advances the system time by 20 minutes or more
HINT
results in a session timeout and causes the scanner to logout.
3.5 Using the System Settings Menus
Network Scanner fi-6000NS Operator's Guide
3
45