Safety Requirements; Product Labelling - Intermec EasyCoder 501 XP Installation & Operation Manual

Safety
Requirements

Product Labelling

Intermec EasyCoder 501 XP – Installation & Operation Ed. 3
Intermec assumes no responsibility as regards fulfilling the CE Di-
rective if the printer is handled, modified or installed in any way
other than that described in Intermec's manuals.
Caution
• Read this manual carefully before connecting the printer.
• Moving parts are exposed when the side and front covers are
open, so ensure that the covers are closed before you operate the
printer.
• Do not open the left-hand cover. Dangerous voltage!
• Do not put your fingers inside the print mechanism when the
power is on.
• Do not open the optional paper cutter when the power is on.
• Place the printer on an even surface which can support its weight
of 13 kgs (29 lbs) plus supplies and possible options.
• Do not spray the printer with water. If using a hose to clean the
premises in an industrial environment, remove the printer or
protect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using a
cleaning card.
The machine sign is attached to the printer's rear plate and contains
information on type, model and serial number as well as mains volt-
age. It is supplemented by various signs of approval.
Chapter 1 Introduction
8