Intermec EasyCoder 501 XP Installation & Operation Manual page 51

Ribbon Load,
5c
#3
In case of 110 mm (4.3") ribbon width, com-
press the bobbin and move it so it snaps into the
3:rd groove.
7
Without releasing the ribbon, turn the printhead
lift knob to "Closed" position to lock the ribbon.
Intermec EasyCoder 501 XP – Installation & Operation Ed. 3
cont'd.
110 mm
(4.3")
Chapter 6
6
2.
Press the ribbon roll onto the ribbon supply spool
(1) and thread the ribbon through the print unit.
Pull out approx. 20 cm (8) of ribbon (2).
8
Press the cardboard core at the front end of the
ribbon onto the take-up spool. Both spools
should rotate counter-clockwise.
Thermal Transfer Printing
1.
50