Setup Mode Overview, Part 2 - Intermec EasyCoder 501 XP Installation & Operation Manual

Setup Mode Overview, Part 2

(Intermec Fingerprint 7.12)
Continued from previous page!
SETUP:
MEDIA
SETUP:
PRINT DEFS
• Press Setup key to exit the Setup Mode.
Intermec EasyCoder 501 XP – Installation & Operation Ed. 3
MEDIA:
MEDIA SIZE
MEDIA:
MEDIA TYPE
MEDIA:
PAPER TYPE
MEDIA:
CONTRAST
MEDIA:
• Press Enter key to perform a Testfeed.
TESTFEED
Two or more copies will be fed out.
PRINT DEFS:
HEAD RESIST
PRINT DEFS:
TESTPRINT
PRINT DEFS:
PRINT SPEED
MEDIA SIZE:
XSTART
MEDIA SIZE:
WIDTH
MEDIA SIZE:
LENGTH
MEDIA TYPE:
LABEL (w GAPS)
TICKET (w MARK)
TICKET (w GAPS)
FIX LENGTH STRIP
VAR LENGTH STRIP
PAPER TYPE:
TRANSFER
PAPER TYPE:
DIRECT THERMAL
CONTRAST:
+0%
+2%
+4%
+6%
+8%
MEDIA TYPE:
+10%
-10%
-8%
-6%
-4%
-2%
Read-only value.
HEAD RESIST:
Printhead resistance is
[nnn]:
automatically set at startup.
Use <F5> to select type of test label.
<ENTER> = PRINT:
Press <Enter> to print it.
<F5> = NEXT #1
If no label is printed, press <F3> for error message.
PRINT SPEED:
[150]:
Chapter 8
XSTART:
[36]:
WIDTH:
[1244]:
LENGTH:
[1800]:
TRANSFER:
RIBBON CONSTANT
TRANSFER:
RIBBON FACTOR
TRANSFER:
LABEL OFFSET
DIRECT THERMNAL:
LABEL CONSTANT
DIRECT THERMAL:
LABEL FACTOR
Setup Mode
RIBBON CONSTANT:
[100]:
RIBBON FACTOR:
[25]:
LABEL OFFSET:
[0]:
LABEL CONSTANT:
[100]:
LABEL FACTOR:
[40]:
68