Router 1 (Rpl Owner) Configuration - Juniper JUNOS OS 10.4 Manual
3d universal edge routers solutions junos os
Hide thumbs
Also See for JUNOS OS 10.4:
- Supplementary manual (6804 pages) ,
- Manual (4268 pages) ,
- Configuration manual (290 pages)
Table of Contents
Advertisement
Router 1 (RPL Owner) Configuration
Copyright © 2012, Juniper Networks, Inc.
Router 2's east control channel interface is
channel interface is
ge-1/2/1.1
Router 3's east control channel interface is
channel interface is
ge-1/0/4.1
NOTE:
Although not strictly required for physical ring protection, this example
configures Ethernet OAM with MEPs.
To configure Router 1 (the RPL owner):
Configure the interfaces:
1.
[edit]
interfaces {
ge-1/0/1 {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 1 {
encapsulation vlan-bridge;
vlan-id 100;
}
}
ge-1/2/4 {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 1 {
encapsulation vlan-bridge;
vlan-id 100;
}
}
}
Configure the bridge domain:
2.
[edit]
bridge-domains {
bd1 {
domain-type bridge;
interface ge-1/2/4.1;
interface ge-1/0/1.1;
}
}
Configure the Ethernet ring protection group:
3.
[edit]
protocols {
protection-group {
ethernet-ring pg101 {
node-id 00:01:01:00:00:01;
ring-protection-link-owner;
east-interface {
(the RPL) and the west control
ge-1/0/2.1
. The protection group is
pg102
ge-1/0/3.1
(the RPL) and the west control
. The protection group is
pg103
Chapter 13: Ethernet Ring Protection
.
.
149
Advertisement
Table of Contents
