Configuring Router Pe2 With A Layer 2 Circuit - Juniper JUNOS OS 10.4 Manual

Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide

Configuring Router PE2 with a Layer 2 Circuit

Router CE1
Configuration
Router PE1
Configuration
80
The configuration of the Layer 2 circuit is based on LDP-signaled MPLS connections.
Configure Ethernet over ATM on the ATM interface.
[edit]
interfaces {
at-2/0/0 {
encapsulation ethernet-over-atm;
atm-options {
vpi 100;
}
unit 0 {
vci 100.34;
family inet {
address 30.1.1.1/24;
}
}
}
}
Configure the Layer 2 circuit.
[edit]
interfaces {
at-2/0/1 {
atm-options {
vpi 100;
}
unit 0 {
encapsulation vlan-vci-ccc;
vpi 100;
vci-range 32 63;
}
}
ge-5/0/0 {
unit 0 {
family inet {
address 20.1.1.1/24;
}
family mpls;
}
}
}
protocols {
mpls {
interface ge-5/0/0.0;
}
ospf {
area 0.0.0.0 {
interface ge-5/0/0.0;
interface lo0.0 {
passive;
}
Copyright © 2012, Juniper Networks, Inc.