Example: Configuring Ethernet Lfm With Loopback Support - Juniper JUNOS OS 10.4 Manual

Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide
Related
Documentation

Example: Configuring Ethernet LFM with Loopback Support

142
802.3ad ae0;
}
}
interfaces ae0 {
unit 0 {
family inet {
address 11.11.11.1/24;
}
}
}
protocols {
oam {
ethernet {
link-fault-management {
interface ae0;
}
}
}
}
Ethernet OAM
Ethernet OAM Link Fault Management on page 137
Example: Configuring Ethernet LFM Between PE and CE on page 138
Example: Configuring Ethernet LFM for CCC on page 139
Example: Configuring Ethernet LFM with Loopback Support on page 142
In this example, LFM is configured between PE and CE. The PE can put the CE in remote
loopback mode. This allows the PE to have all the traffic sent to the CE looped back for
diagnostics purposes, as shown in
Figure 22: Ethernet LFM with Loopback Support
To configure LFM between a PE and a CE:
Configure LFM loopback on the PE router:
1.
[edit]
interfaces ge-1/0/0 {
unit 0 {
family inet {
address 11.11.11.1/24;
}
}
Figure 22 on page 142.
Copyright © 2012, Juniper Networks, Inc.