Juniper JUNOS OS 10.4 Manual page 111

Router CE2
Configuration
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
connections {
remote-interface-switch rwsl {
interface ae0.0 {
transmit-lsp- lsp-1sp2-1;
receive-lsp lsp1-2;
}
}
}
Configure the dual-tagged Ethernet Interface.
[edit]
interfaces {
ge-0/0/0 {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 0 {
vlan-tags outer 100 inner 34;
family inet {
address
30.1.1.10/24;
}
}
}
}
You verify your configuration on the MX Series router with the
user@PE2>show connections
CCC and TCC connections [Link Monitoring On]
Legend for status (St)
UN -- uninitialized
NP -- not present
WE -- wrong encapsulation
DS -- disabled
Dn -- down
-> -- only outbound conn is up
<- -- only inbound
Up -- operational
RmtDn -- remote CCC down
Restart -- restarting
Connection/Circuit
trans
rws1
1
ae0.0
lsp2-1
lsp1-2
ATM Ethernet Interworking
MX Series Router ATM Ethernet Interworking Function on page 77
Chapter 8: MX Series Router in an ATM Ethernet Interworking Function
Legend for connection types
if-sw:
rmt-if: remote interface switching
lsp-sw: LSP switching
tx-p2mp-sw: transmit P2MP switching
rx-p2mp-sw: receive P2MP switching
conn is up Legend for circuit types
intf -- interface
tlsp -- transmit LSP
rlsp -- receive LSP
Type
rmt-if
intf Up
tlsp Up
rlsp Up
command:
show connections
interface switching
St Time last up
RmtDn May 12 15:34:46
# Up
91