Ce Routers Without Dynamic Profiles - Juniper JUNOS OS 10.4 Manual

Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide

CE Routers Without Dynamic Profiles

66
unit 0 {
vlan-id 10;
}
}
ge-0/0/2 {
unit 0 {
vlan-id 20;
}
}
ge-0/0/3 {
unit 0 {
vlan-id 30;
}
}
[edit dynamic-profiles]
green_vpls_pw_1 interfaces $junos-interface-ifd-name {
unit $junos-underlying-unit-number {
vlan-tags outer 200 inner 100;
}
}
NOTE: This is not a complete router configuration.
With this configuration, broadcast packets inside frames arriving with VLAN identifier 10
on ge-0/0/1 are normalized to a frame with VLAN identifier 100. The broadcast packet
and frames egressing
ge-0/0/2
30 respectively, according to the interface configuration. Frames egress the VPLS
pseudowire in routing instance
of the normalized value.
You can apply a dynamic profile to an entire VPLS configuration, not just a neighbor.
Consider the following configuration, which does not use dynamic profiles to manipulate
VLAN identifiers on a customer edge (CE) router with VLAN identifier 100:
[edit routing-instances]
green {
instance-type vpls;
interface ge-0/0/1.1;
interface ge-0/0/2.1;
interface ge-0/0/3.1;
vlan-tags outer 200 inner 100;
protocols vpls {
vpls-id 10;
neighbor 10.1.1.20;
}
{...more...}
}
[edit interfaces]
or have this VLAN value swapped to 20 and
ge-0/0/3
with an outer VLAN tag value of 200 pushed on top
green
Copyright © 2012, Juniper Networks, Inc.