Example: Configuring Vpls Pseudowires With Dynamic Profiles-Complex; Solutions; Configuration Of Routing Instance And Interfaces Without Dynamic; Profiles - Juniper JUNOS OS 10.4 Manual

Junos OS 12.1 MX Series 3D Universal Edge Routers Solutions Guide
Related
Documentation
Example: Configuring VPLS Pseudowires with Dynamic Profiles—Complex Solutions
Configuration of Routing Instance and Interfaces Without Dynamic Profiles
68
vlan-id 100;
}
}
[edit dynamic-profiles]
green_vpls_pw_2 interfaces $junos-interface-ifd-name {
unit $junos-underlying-unit-number {
vlan-tags outer 200 inner 100;
}
}
NOTE: This is not a complete router configuration.
With this configuration, broadcast packets inside frames arriving with VLAN identifier
100 on are normalized to a frame with VLAN identifier 100 (in this case, they
ge-0/0/1
are unchanged). The broadcast packet and frames egressing
unchanged as well, according to the interface configuration. Frames egress the VPLS
pseudowire in routing instance
of the normalized value.
Dynamic Profiles for Interfaces and Protocols
Dynamic Profiles for VPLS Pseudowires on page 63
Example: Configuring VPLS Pseudowires with Dynamic Profiles—Complex Solutions
on page 68
Dynamic profiles for VPLS pseudowires can be helpful in a variety of VLAN configurations.
This section explores some of these situations through examples.
NOTE: These examples are not complete router configurations.
All of the examples in this section address the same basic topology. A routing instance
uses a trunk bridge to connect different departments in an organization, each with
blue
their own VLANs, at two different sites. The organization uses a BGP-based VPLS with
a virtual switch to accomplish this.
Configuration of Routing Instance and Interfaces Without Dynamic Profiles on page 68
Configuration of Routing Instance and Interfaces Using Dynamic Profiles on page 69
Configuration of Tag Translation Using Dynamic Profiles on page 72
The basic configuration of routing instance and interfaces without dynamic profiles
follows:
[edit routing-instance blue]
with an outer VLAN tag value of 200 pushed on top
green
Copyright © 2012, Juniper Networks, Inc.
ge-0/0/2 or ge-0/0/3 are