Exchanging The Battery Of The Internal Clock; Specifications; General - Sony PMW-500 Operation Manual

Exchanging the Battery
of the Internal Clock
The camcorder's internal clock is powered by a
lithium battery. If the message "BackUp Battery
End" appears in the viewfinder, this battery must
be exchanged. Contact a Sony service
representative.
164 Exchanging the Battery of the Internal Clock / Specifications

Specifications

General

Power requirements
12 V DC (11 V to 17.0 V)
Power consumption
Approx. 29 W (main unit only, during recording
with the LCD monitor lit)
Notes
• Do not use a video light with power
consumption of over 50 W.
• When connecting a device to the DC OUT
connector, use one with current
consumption of 0.5 A or more.
Operating temperature
–5ºC to +40ºC (23ºF to 104ºF)
Storage temperature
–20ºC to +60ºC (–4ºF to 140ºF)
Recording/playback formats
UDF mode
• HD422
Video codec: MPEG-2 422P@HL
Video rate: 50 Mbps/CBR
Video samples: 1920 × 1080, 1280 × 720
Proxy video: MPEG-4
Audio: LPCM 4CH, 24 bits, 48 kHz
Proxy audio: A-law
• HD420
Video codec: MPEG-2 MP@HL(1440)
Video rate: 35 Mbps/VBR
Video samples: 1440 × 1080
Proxy video: MPEG-4
Audio: LPCM 4CH, 16 bits, 48 kHz
Proxy audio: A-law
Video codec: MPEG-2 MP@HL
Video rate: 35 Mbps/VBR
Video samples: 1280 × 720
Proxy video: MPEG-4
Audio: LPCM 4CH, 16 bits, 48 kHz
Proxy audio: A-law