Loading Paper Into The Bypass Tray; To Load Paper (Bypass Tray) - Konica Minolta bizhub 200 User Manual

2
2.6

Loading paper into the bypass tray

Paper can be fed manually through the bypass tray if you wish to copy onto
paper that is not loaded into a paper tray, or if you wish to copy onto thick
paper, postcards, envelopes, overhead projector transparencies or label
sheets.

To load paper (bypass tray)

1
Open the bypass tray.
– When loading large-
sized paper, pull out
the tray extension.
2
With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
3
Slide the lateral guides
to fit the size of paper
being loaded.
– Do not load so many
sheets that the top of
the stack is higher
than the , mark. A
maximum of 150
sheets of plain paper
can be loaded.
– Slide the lateral
guides firmly up
against the edges of
the paper.
How is curled paper loaded?
?
% Flatten the paper before loading it.
2-60
Before making copies
Tray extension
Lateral guides
200/250/350