Konica Minolta bizhub 200 User Manual page 226

Copy operations

Hide thumbs Also See for bizhub 200:

Table of Contents

Troubleshooting

Return levers FN1 and FN3 to their original positions.

If the punch unit is installed, insert the hole-punch waste container into

its original position.

Lower lever FN4.

Turn dial FN5 or dial

FN6, and then pull out

any misfed paper.

Return lever FN4 to its original position.

Close the front door.

For details on the positions of paper misfeeds, refer to "Paper misfeed in-

dications" on page 5-5.

Troubleshooting

Bizhub 250 Bizhub 350