To Delete A Registered Copy Program - Konica Minolta bizhub 200 User Manual

4
4
Check the copy settings registered with the selected program number.
– The program whose copy settings are being checked in the Check
Program screen can be recalled. Touch [Recall] to recall the regis-
tered copy settings and display the Basics screen again.
5
Touch [Enter].
The Program screen appears again.
!
Detail
There are three Check Program screens. Touch [Fwd] to display the next
screen, or touch [Back] to display the previous screen.
The copy settings cannot be changed from the Program Check screens.

To delete a registered copy program

Registered copy programs can be deleted.
1
Press the [Mode Memo-
ry] key.
The Program screen ap-
pears.
2
Touch [Delete].
4-12
Additional copy operations
Mode Memory
200/250/350