Utility mode
11.4
Displaying the Administrator Management screen
In order to change Administrator Management settings, display the Adminis-
trator Management screen.
Reminder
Be sure to keep the administrator access code in a safe place. If the ad-
ministrator access code is lost while "Enhance Security" is set to "ON",
Administrator Management settings can no longer be specified. In this
case, the administrator access code cannot be specified again. For de-
tails, contact your technical representative.
To display the Administrator Management screen
1
Press the [Utility/Counter] key.
The Utility/Counter screen appears.
2
Touch [Admin. Manage-
ment].
The Administrator Code
screen appears.
3
Use the keypad to type
in the 8-digit administra-
tor access code, and
then touch [Enter].
–
To change the en-
tered value, press
the [C] (clear) key,
and then enter the
correct value.
–
To cancel changes to
the settings, touch
[Cancel].
The Administrator Management screen appears.
200/250/350
11
11-21