Changing Engine Oil; Changing Transmission Oil - E-TON ROVER Owner's Manual

Changing Engine Oil

Engine Oil Drain Engine Oil Drain
1. Place an oil catch pan under the unit
directly below the engine crankcase.
2.Remove the engine oill drain plug located
on the left-hand side of the engine.
3. Remove the engine oil dipstick located
on the right-hand side of the engine.
4. Allow the oil to drain completely (15-30
min).
5. Reinstall the drain plug and tighten.
Torque to 7-101bf-ft
6. Fill the crankcase with of SAE15W/40
engine oil through the dip dipstick hole.
0.9 liter/0.9 quart.
7.R einstall t he e ngine o il d ipstick a nd f inger
tighten.
8. Dispose of used oil at a proper recycling
station as required by law
Copyright ©2008-2009 ETON America, all rights reserved.

Changing Transmission Oil

1. Place an oil catch pan under the unit
directly below the transmission box.
2. Remove the transmission box drain plug
located on the bottom of the transmission
box on the underside of the unit.
3. Remove the transmission box fill whole
plug locate on top of the transmission
4. Allow the oil to drain completely (15-30
min).
5. Reinstall the drain plug and tighten. Torque
to 7-10lbf-ft
6. Fill the transmission box with SAE 80-90
gear oil.
The transmission box capacity is 300cc /
10.2oz.
7. Reinstall the fill hole plug finger tight.
8. Dispose of used oil at a proper recycling
station as required by law.
Page 22