Special Tools - Yamaha FZ6-SS Service Manual

EAS00027

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use only
the appropriate special tools as this will help prevent damage caused by the use of inappropriate tools
or improvised techniques. Special tools, part numbers or both may differ depending on the country.
When placing an order, refer to the list provided below to avoid any mistakes.
NOTE:
S For U.S.A. and Canada, use part number starting with "YM-", "YU-", or "ACC-".
S For others, use part number starting with "90890-".
Tool No.
Flywheel puller
Flywheel puller
90890-01362
Adapter
YU-33270-B
Adapter
This tool is used to remove the generator ro-
90890-04089
tor.
YM-33282
Sheave holder
90890-01701
This tool is used to hold the generator rotor
YS-01880-A
when removing or installing the generator ro-
tor bolt or pickup coil rotor bolt.
Piston pin puller
90890-01304
YU-01304
This tool is used to remove the piston pins.
Radiator cap
Radiator cap tester
tester
Adapter
90890-01325
YU-24460-01
Adapter
These tools are used to check the cooling
90890-01352
system.
YU-33984
Steering nut wrench
90890-01403
YU-33975
This tool is used to loosen or tighten the steer-
ing stem ring nuts.
Damper rod holder
T-handle
90890-01460
These tool are used for holding the damper
-01326
rod when removing or installing the damper
rod.
Pivot shaft Pivot shaft wrench
wrench
Pivot shaft wrench adapter
90890-01471
YM-01471
Pivot shaft wrench
This tool is used to loosen or tighten the pivot
adapter
adjust bolt and engine mount adjust bolt.
90890-01476
Tool name/Function
1
2
1-9
SPECIAL TOOLS
Illustration
1
GEN
INFO