Yamaha FZ6-SS Service Manual page 235

CAMSHAFTS
3. Install:
S dowel pins
S exhaust camshaft caps
S intake camshaft caps
NOTE:
S Make sure each camshaft cap is installed in its
original place.
S Make sure the arrow mark a on each cam-
shaft cap points towards the right side of the
engine.
4. Install:
S camshaft cap bolts
NOTE:
Tighten the camshaft cap bolts in stages and in
a crisscross pattern, working from the inner
caps out.
I1, I2: Intake side camshaft cap mark
E1, E2: Exhaust side camshaft cap mark
CAUTION:
S Lubricate the camshaft cap bolts with the
engine oil.
S The camshaft cap bolts must be tightened
evenly or damage to the cylinder head,
camshaft caps, and camshafts will result.
S Do not turn the crankshaft when installing
the camshaft to avoid damage or improper
valve timing.
5. Install:
S timing chain guide (exhaust side)
NOTE:
When installing the timing chain guide, be sure
to keep the timing chain as tight as possible on
the exhaust side.
5-16
ENG
10 Nm (1.0 mSkg, 7.2 ftSlb)