Crankshaft Position Sensor And Pickup Rotor - Yamaha FZ6-SS Service Manual

CRANKSHAFT POSITION SENSOR AND PICKUP ROTOR

CRANKSHAFT POSITION SENSOR AND PICKUP ROTOR
15 Nm (1.5 mSkg, 11 ftSlb)
12 Nm (1.2 mSkg, 8.7 ftSlb)
Order
Removing the crankshaft position
sensor and pickup rotor
Seat
Front cowling inner panel (left and right)
Fuel tank
Engine oil
Generator cover
1 Crankshaft position sensor lead coupler
2 Pickup rotor cover
3 Pickup rotor cover gasket
4 Dowel pin
10 Nm (1.0 mSkg, 7.2 ftSlb)
Job/Part
5-42
35 Nm (3.5 mSkg, 25 ftSlb)
Q'ty Remarks
Remove the parts in the order listed.
Refer to "SEAT" in chapter 3.
Refer to "COWLINGS" in chapter 3.
Refer to "FUEL TANK" in chapter 3.
Drain.
Refer to "CHANGING THE ENGINE OIL"
in chapter 3.
Refer to "STARTER CLUTCH AND
GENERATOR".
1 Disconnect.
1
1
2
ENG