Checking And Lubricating The Cables; Lubricating The Levers And Pedals; Lubricating The Sidestand; Lubricating The Centerstand - Yamaha FZ6-SS Service Manual

CHECKING AND LUBRICATING THE CABLES /

LUBRICATING THE SIDESTAND/ LUBRICATING THE CENTERSTAND

LUBRICATING THE LEVERS AND PEDALS /

EAS00170
CHECKING AND LUBRICATING THE
CABLES
The following procedure applies to all of the in-
ner and outer cables.
Damaged outer cable may cause the cable to
corrode and interfere with its movement. Re-
place damaged outer cable and inner cables
as soon as possible.
1. Check:
S outer cable
Damage ! Replace.
2. Check:
S cable operation
Rough movement ! Lubricate.
NOTE:
Hold the cable end upright and pour a few drops
of lubricant into the cable sheath or use a suit-
able lubricating device.
EAS00171
LUBRICATING THE LEVERS AND PEDALS
Lubricate the pivoting point and metal-to-metal
moving parts of the levers and pedals.
EAS00172

LUBRICATING THE SIDESTAND

Lubricate the pivoting point and metal-to-metal
moving parts of the sidestand.
EAS00173

LUBRICATING THE CENTERSTAND

Lubricate the pivoting point and metal-to-metal
moving parts of the centerstand.
3-57
WARNING
Recommended lubricant
Engine oil or a suitable cable
lubricant
Recommended lubricant
Lithium-soap-based grease
Recommended lubricant
Lithium-soap-based grease
Recommended lubricant
Lithium-soap-based grease
CHK
ADJ