for CAL
Clip
1
Roll over valve
2
Canister hoes
3
Balance hose
4
Coolant reservoir tank
5
Coolant reservoir tank hose
6
Coolant breather hose
7
Roll over valve hose
8
Canister
9
Hose
10
Fuel tank drain hose
11
Clamp
12
CABLE ROUTING
A Front side.
B Point the paint marking upward.
C Pass the canister hose and balance hose behind
the bolt.
D Pass the canister hose outside, pass the balance
hose inside.
E Pass the coolant reservoir tank hose hangs dowm
downward from back of the bolt.
F Point the knob of the clip upward. The application of
water is possible at the time of attachment.
G Pass the balance hose under the canister hose.
H Insert this portion securely.
I Spittle is turned back.
J Insert to the back, but the tip of the nipple should not
come out from the hose.
2-49
SPEC