Refrigerant Lines Construction - Mazda RX-8 2004 Service Highlights

REFRIGERANT LINES CONSTRUCTION

• Aluminum alloy has been adopted for the pipes of the refrigerant lines and rubber (flexible hoses) has been
adopted for the hoses.
• A high-pressure charging valve is installed on cooler pipe No.2, and a low-pressure charging valve is installed
on the cooler hose (LO).
COOLER PIPE No.2
HIGH-PRESSURE CHARGING VALVE
COOLER PIPE No.1
End Of Sie
BASIC SYSTEM
LOW-PRESSURE CHARGING VALVE
COOLER HOSE (HI)
CHU071161460S01
COOLER HOSE (LO)
07–11–7
07–11
CHU0711S013