CYLINDER HEAD COVER CONSTRUCTION [MZI-3.5]
• The cylinder head cover is made of integrated aluminum alloy, which is lightweight.
• There are holes for installing the oil control valve (OCV).
• The cylinder head cover has been equipped with a dipstick insertion hole.
End Of Sie
CYLINDER HEAD CONSTRUCTION [MZI-3.5]
• A high-heat conductive, lightweight aluminum alloy cylinder head has been adopted.
• Compact, pentroof-type combustion chambers have been adopted.
• Torque-to-yield cylinder head bolts have been adopted for the cylinder head bolts.
• The boss for installing the camshaft position (CMP) sensor is provided at the rear of the cylinder head.
EXHAUST SIDE
End Of Sie
NG: CYLINDER BLOCK
01-10–2
MECHANICAL [MZI-3.5]
LH
OCV ATTACHMENT HOLE
CYLINDER HEAD BOLT
INTAKE SIDE
ENGINE FRONT SIDE
RH
DIPSTICK
INSERTION
HOLE
INTAKE SIDE
EXHAUST SIDE
id0110c1100200
ac9uun00000027
id0110c1100300
ac9uun00000028