Connecting To The Usb Port - Extron electronics HDMI DA Series User Manual

Connecting to the USB Port

Use the mini Type B USB port on the front panel
distribution amplifier to a host computer to
unit with
1.
2.
SIS commands
(see page 17).
Connect a USB A to mini B cable between the front panel USB Config port and a USB
port of the PC.
Mini Type B
USB
CONFIG
HDMI DA6
Figure 4. Connecting a PC to the HDMI DA6 Front Panel USB Port
If this is the first time a HDMI DA series device has been connected to the PC, the
opens. Connect to Windows Update to search the web for the
New Hardware Wizard
driver needed for the USB port to communicate with the distribution amplifier. This is not
necessary if the USB driver is already on your PC.
Figure 5. Found New Hardware Wizard Welcome Screen
•
Select
Yes, this time only
•
Select
Yes, now, and every time I connect a device
to Windows Update every time the distribution amplifier connects to this USB port.
•
Select
No, not this time
example, if the driver is already on the PC).
(figure 7,
B
update firmware
Type A
USB
USB
Ports
USB Cable
INPUT OUTPUTS
SIGNAL
1 2 3 4 5 6
EDID
HDCP
HDMI DA6
HDMI DISTRIBUTION AMPLIFIER
to connect the PC to Windows Update only this time.
if you do not want to connect to Windows Update (for
HDMI DA Series • Installation
on page 11) to connect the
(see page 21) or to configure the
USB 1
Computer
Found
to automatically connect
9