Extron electronics HDMI DA Series User Manual page 30

NOTES:
•
The original factory-installed firmware is permanently available on the
HDMI DA2, HDMI DA4 or HDMI DA6. If the attempted firmware upload fails for
any reason, the unit reverts to the factory version.
•
By default, when the firmware is downloaded from the Extron site, it is saved in
one of the following paths:
C:\Program Files\Extron\Firmware\folder_name
C:\Program Files (x86)\Extron\Firmware\folder_name
where
folder_name
something similar.
10. If you have multiple units that are all connected to your computer, you can upload the
same firmware to all of them. Click
The first device is added to the Devices section and the
open. Add additional devices, by repeating this step.
When you are about to add the last device, (or if you are only updating a single unit)
press Add (do not press Add Next). The device is added to the device list in the Firmware
Loader window and the
11.
Highlight the distribution amplifier in the device list and click
indicators show the progress of the update:
•
The
Transfer Time
the update.
•
The Total Progress
•
In the section, the
Devices
and another progress bar. The
12.
The upload is complete when the
column shows
Progress
in the field. Close the Firmware Loader dialog.
Status
may be ,
HDMI DA2 HDMI DA4
.
Add Next
dialog closes.
Add Device...
section shows the amounts of remaining and elapsed time for
section displays a progress bar with
column displays an incrementing percentage
Progress
Status column displays
Remaining Time
, and is displayed above the progress bar and
100% Completed
HDMI DA Series • Updating Firmware
(Windows XP) or
(Windows 7)
, ,
HDMI DA6 HDMI DA
Add Device... dialog remains
.The following
Begin
Uploading... above it.
Uploading .
field shows 00.00.00 , the
, or
24