Program 450 - PLU MIX & MATCH Programming
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 4 5 0, press the SBTL key.
4
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
Press a PLU on the keyboard, or
•
Press the first PLU in a range of PLUs that are to receive the same setting then press the
last PLU, or
•
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
•
Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last PLU number in the range; press the PLU key,
or
Enter the PLU#,
•
For a barcode item, scan the barcode.
4. Enter the number of the Mix & Match Table (1-20 by default memory allocation; please
check memory allocation for the actual range in your system); press the X/TIME key.
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
88 • Program Mode Programming
5
0
SBT L
PLU
PLU
PLU
PLU
up to 15 digits
PLU
up to 15 digits
X/TIME
Enter the PLU#,
up to 15 digits
Sam4S ER230 Series Electronic Cash Register AU
PLU