F4 (Setup) Menu - ENIGMA II Programming Manual

F3 (RESET)
Different level resets of the receiver unit.
F1 (DEFAULT) – This function is to delete full event memory and set all settings back to
default value.
F2 (MEMORY) – This function is to delete full event memory, then receiver restart.
F3 (RESET) – Receiver restart without deleting any events / settings.
F4 (BACK)
Navigation back with one menu level in receiver menu.

3.2 F4 (SETUP) menu

OPTIONS
F1
F1 (OPTIONS)
CONSOLE
BUZZER OPERATE
+
F1
First choose the option to configure with ◄ and ► buttons (chosen value is blinking).
For changing the value you can use F1 (+) and F2 (–) buttons. You can apply settings
with ENTER button.
It is recommended to modify the following settings only:
PORTS
F2
CPM OPTIONS
YES
–
F2
8
TIME
F3
VER: CPM2.60.BC06
PAGE CANCEL
F3
BACK
F4
F4