System Programming From Receiver Menu - ENIGMA II Programming Manual

SURGARD receiver should be chosen in case of SIMS, MYMAS or other monitoring
software types.

3. SYSTEM PROGRAMMING FROM RECEIVER MENU

After completing instructions from Installer Manual it is time to start ENIGMA II
monitoring receiver programming. The main settings can be done through the receiver
menu displayed on LCD.
The starting display, LED signals of monitoring receiver, and the functions without user
code are shown in User Manual.
ACCOUNT EVENT
5451
5451
5451
5451
5451
FONT
F1
After turning on the receiver and system boot the display above is shown on LCD
screen. F1 – F4 buttons (there is the assigned function above each button) can be
used for navigation in menu, and they can be used also to execute functions which are
protected with password (and not mentioned in User Manual).
Note: After the first start of the device it is always recommended to apply default
settings: F3 (UTIL) / F3 (RESET) / F1 (DEFAULT).
Default password for menu access: ENIGMA
Note: It is strongly recommended to change default password with EniTerm software.
CLOSING
BURGLARY
ZONE RESTORE
OPENING
CANCEL
CODES
F2
01 001 IP 11:35:37
01 005 IP 11:45:22
01 005 IP 11:45:24
01 001 IP 11:50:39
01 001 IP 11:50:40
UTIL
F3
6
09:17:46
LINE TIME
SETUP
F4