ENIGMA II Programming Manual page 24

CPM – CPM card (cpm.bot) programming;
CPM Data – Receiver menu language (cpm.bin) / Web browser menu (cpm.dat) / Web
logo (.jpg) update;
LC Tel. Line Card – Telephone line card (lc.bot) upgrade;
IP Card (USB) – IP extension card (ip.ipx) upgrade – Not possible through CPM!
RC, LRR2 – Radio Card – Radio repeater device firmware upgrade.
5. The following window will pop up if you use IP Card update.
6. Choose the proper firmware file for upgrade (2. STEP), then NEXT.
Note: In case of IP card you should select ip.ipx firmware file in Connect / Load File
menu.
7. Choose the COM port where receiver is connected (3. STEP), then NEXT.
Note: The baudrate should be set to 57600 in case of IP card update. IP card update
through Ethernet is only possible through local network.
Note: Line card update should be done separately for each line card, after choosing the
line card number for upgrade.
8. Upgrade process can be started with START button.
9. Do not forget to send back the saved card (CPM / LC / IP / RC) settings at the end of
the upgrade (please check 4. System programming with PC software chapter).
10. To use new functions it might be required to get the latest EniTerm software with
the newest ET (setup) files – please download and use newest version.
24