ENIGMA II Programming Manual page 22

Received events in Enigma II can be checked easily with a simple web browser access.
For this IP address (and port if it is different from 80) of Enigma II unit should be typed in
a web browser (Internet Explorer recommended). Then all received events from receiver
memory can be seen.
Note: For the operation of event list review through web browser the IP ADDRESS and
HTTP PORT should be enabled in rooter as well.
Note.: Web browser access can be limited with password generated by wpg.exe
software.
Note: Web browser access function usage is described deeply in receiver TCP/IP port
settings in this manual.
You should see a similar window (with refresh and page up/down) in web browser:
Note: If you type in web browser the /list.php?a=1234 command after the receiver IP
address, only the events with the given user account can be seen in the list (in this case
1234 user account). For example: 74.125.232.210:8800/list.php?a=54A5 (it means only
5405 user account events appear in the list).
Note: Always use 'A' digits instead of '0' digits in client account.
Note.: The status and event list of IP Ethernet receiver card can also be checked
through web browser after typing the IP address of the card.
22