4-18 FUEL AND LUBRICATION SYSTEM
REASSEMBLY AND REINSTALLATION
Carburetor reassembly can be performed in the reverse order
of disassembly. When reassembling, carefully observe the fol-
lowing instructions.
7
* Assemble the parts taking consideration of their func-
tion.
* Replace O-rings and seals with new ones.
• After cleaning, reinstall the pilot screw to the original setting by
turning the screw in until it lightly seats, and then backing it out
the same number of turns counted during disassembly.
7
Replace the O-ring A with a new one.
• Apply grease to the O-ring and install the accelerating plunger.
/ 99000-25010: SUZUKI SUPER GREASE "A"
• Fit the seal rings securely to the float chamber and install the
float chamber to the throttle body.
• Install the clamp to the screw A and tighten the screws.
• Install the jet needle with the pin B on the spacer securely
engaged with the hole C on the piston valve.