Suzuki VL125 Service Manual page 82

LEFT CRANKCASE BEARING
• Remove the oil seals 1 and 2.
% 09913-50121: Oil seal remover
• Remove the bearing retainer.
• Remove the bearings 3, 4 and 5.
% 09921-20220: Bearing remover set
(3: φ 20, 4: φ 17, 5: φ 35)
REASSEMBLY
Assemble the crankcase in the reverse order of disassembly.
Pay attention to the following points:
RIGHT CRANKCASE BEARING
• Drive in the bearings 1, 2, 3 and 4.
% 09913-70210: Bearing installer set
(1: φ 68, 2: φ 55, 3: φ 42, 4: φ 42)
LEFT CRANKCASE BEARING
• Drive in the bearings 1, 2 and 3.
% 09913-70210: Bearing installer set
(1: φ 72, 2: φ 40, 3: φ 55)
ENGINE 3-47