Connection - Sony XCL-5005CR Technical Manual

Connection

C-mount lens
Power supply
You can supply power to the XCL-5005CR/5005 using the following methods.
Using the DIGITAL IF (interface) connector
The XCL-5005CR/5005 supports the PoCL (Power over Camera Link) standard. By connecting a PoCL-compatible camera link cable to
a PoCL-compatible camera module interface board, you can power, control, and output images from the camera using a single cable.
Using the DC IN connector
You can supply power via the DC IN connector using the power adapter.
Use DC-700/700CE which is the stable power source free from ripple or noise.
When both the DIGITAL IF and DC IN connectors are used, the power supply from the DC IN connector is given priority.
6
Connection
Digital interface cable
XCL-5005CR/5005
Camera cable
CCXC-12P02N
CCXC-12P05N
Tripod adaptor
CCXC-12P10N
VCT-ST70I
CCXC-12P25N
* If the camera module interface board for the camera supports PoCL, the
camera can be operated even if the items within the dashed line are not
connected.
Camera module interface board
AC
TRIG
Camera adaptorDC-700/700CE
(Conforms to EIAJ 12-pin assignments)