Specifications - Sony XCL-5005CR Technical Manual

Specifications

Specifications
Imaging system
Pickup device Progressive scan 2/3 type CCD
Effective picture elements (horizontal/vertical)
2456 × 2058
Optical blank 40 elements on each horizontal line
Cell size 3.45 × 3.45 µm (horizontal/vertical)
Chip size 9.93 × 8.70 mm (horizontal/vertical)
Optical system and others
Lens mount C-mount
Flange focal length
17.526 mm
Synchronization
Internal
Video output XCL-5005CR: RAW data/RGB data
switching
RAW data: LVDS 12 bits/10 bits/8
bits switching
RGB data: LVDS R/G/B 8 bits
XCL-5005: LVDS 12 bits/10 bits/8 bits
switching
Output tap 1TAP/2TAP switching (However, only
1TAP when RGB data output of
XCL-5005CR)
Reference video output level
3760 steps (12 bits) / 235 steps (8 bits)
Reference pedestal level
240 steps (12 bits) / 15 steps (8 bits)
Range of guarantee video output
240 to 3900 steps (12 bits) / 15 to
243 steps (8 bits)
Output signal frequency
15 Hz (normal mode)
Effective lines 2448 × 2050 (horizontal/vertical)
Horizontal resolution
Equivalent to 1800 TV lines or more
Sensitivity XCL-5005CR
2000 lx, F5.6 (0 dB)
XCL-5005
400 lx, F5.6 (0 dB)
Minimum illumination
XCL-5005CR
8 lx (with the gain control at +18 dB,
F1.4)
XCL-5005
1 lx (with the gain control at +18 dB,
F1.4)
Gain 0 to +18 dB
Gamma correction
OFF/ON (Mode 1 to 7)
Read mode normal/binning (XCL-5005 only)
Shutter External trigger shutter
Shutter speed External trigger shutter: 2 to 1/10000 s.
White balance (XCL-5005CR only)
PRESET/MANUAL/ONE PUSH
Power +12 V DC (Range: +10.0 to 15 V: with
DC IN connector/ digital interface
connector)
Power consumption
3.8 W
Operating temperature
–5 to +45 °C (23 to 113 °F)
Storage temperature
–30 to +60 °C (–22 to 140 °F)
Operating relative humidity
20 to 80% (no condensation)
Storage relative humidity
20 to 95% (no condensation)
Vibration resistance
10 G (20 Hz to 200 Hz)
Shock resistance
70 G
External dimension (w/h/d)
44 × 44 × 57.5 mm (1
3
/ inches)
8
Mass Approx. 130 g (4.8 oz)
MTBF 75,300 hours (Approx. 8.6 years)
Accessories Lens mount cap (1)
Operating Instructions (1)
Design and specifications are subject to change without
notice.
IMPORTANT
The nameplate is located on the bottom.
(AUTO)
3 3
/ × 1 / × 2
4 4
53
Specifications