SERVICE MANUAL
Ver 1.2 2003. 03
Revision History
Revision History
M2200 MECHANISM
Link
Link
SPECIFICATIONS
SPECIFICATIONS
SERVICE NOTE
SERVICE NOTE
DISASSEMBLY
DISASSEMBLY
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987624151.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL1 (987624141.pdf).
• For MECHANISM ADJUSTMENTS, refer to the "8mm Video MECHANICAL ADJUSTMENT MANUAL
M2000 MECHANISM " (9-929-861-11).
• Reference No. search on printed wiring boards is available.
• When the machine needs to be repaired, make sure to follow the items of "CCD TYPE CHECK" and "LCD
TYPE CHECK".
• HELP: Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
On the VC-305 board
This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the VC-305 board.
Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the VC-305
board are not shown.
The following pages are not shown.
Schematic diagram ............................. Pages 4-9 to 4-48
Printed wiring board ............................ Pages 4-67 to 4-70
Waveforms ........................................... Page 4-82 to 4-85
DCR-TRV250
BLOCK DIAGRAMS
BLOCK DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
FRAME SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
Mounted parts location .................. Page 4-88, 4-89
Electrical parts list ......................... Pages 5-18 to 5-25
DIGITAL VIDEO CAMERA RECORDER
RMT-814
LEVEL
US Model
Canadian Model
E Model
Brazilian Model
Tourist Model
PRINTED WIRING BOARDS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
REPAIR PARTS LIST
2
IX