Table of Contents
Advertisement
Information
The following describes the changes between the XCL-
5000 and XCL-5005.
• Setting value acquisition data has been added as a
result of adding new functionality to the XCL-5005.
The setting values listed below have been added, so
take care during setting value acquisition.
Category name
Content
SH
Shutter
TR
Trigger
DG
Digital
PT
Partial
IO
IN/OUT
• Parameters that are not initialized on the XCL-5000
but are initialized on the XCL-5005.
This applies to the parameters listed below. Take care
when initializing settings.
Command
Parameter 1
AUTO-DCLAMP
1 (ON)
DTL-COEF
8
BINARIZE
0 (OFF)
52
Information
Data number
–
–
–
–
–
Parameter 2
Parameter 3
8192
–
–
–
1911
–
Data
<Shutter speed adjusting value>, <Shutter speed fine-
adjusting>
<Trigger overlap mode>
<Automatic clamp control correlation factor>
<Partial scan offset value>, <Horizontal partial scan mode>,
<horizontal partial scan column number>
<Image output data tap>, <Flip-flop output setting>
Explanation
Automatic clamp control setting
Edge enhancement filter factor setting
Binarization mode, Binarization threshold value setting
Advertisement
Table of Contents
