Digital Pedestal [Xcl-5005Cr] [Xcl-5005]; 8/10/12 Bit Length Selection [Xcl-5005Cr] [Xcl-5005]; Grayscale Chart [Xcl-5005] - Sony XCL-5005CR Technical Manual

6.11. Digital pedestal
[XCL-5005CR] [XCL-5005]
Configure this setting with DPEDESTAL. This can be
adjusted from +1 to +255. This setting raises the whole
level.
Y
6.12. 8/10/12 bit length selection
[XCL-5005CR] [XCL-5005]
Configure this setting with IMG-WIZE. You can select
12-bit output, 10-bit output, and 8-bit output. With the
XCL-5005CR, you can select RGB 24-bit (8 bits each
for R, G, B) output. When selecting RGB 24-bit, you can
set RGB color correction, which allows for ±255 step
correction of each of the R, G, and B levels. This is set
to 12 bits at the time of shipment.
6.13. Grayscale chart
[XCL-5005]
Configure this setting with GRAYSCALE. This setting
outputs the grayscale chart in the camera instead of
video signals. This is common for all modes. It can be
used to, for example, set the condition and check the
level in the current usage environment.
Block Level (12 bits) Width [Pixel]
A
186 47
B
558 204
C
930 204
D
1302 204
E
1674 204
F
2046 409
G
2790 204
H
3162 204
I
3534 204
J
3906 204
K
4095 360
Height [Pixel]
2050
37
6. DSP Operation