1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232), you can operate the
camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) For details on the LAN connection using LAN cable, see page 28.
Notes
Use only the AC power adaptor (JEITA type4)
supplied with the unit. Do not use any other AC
power adaptor.
Polarity of the plug
USB cable (not supplied)
to USB VIDEO output
VISCA cable (not supplied)
to VISCA RS-232 IN
to VISCA RS-232 OUT To VISCA IN of other
LAN cable (not supplied)
to LAN
to 12V
You have to set the video format of the signal to be
When connecting this unit to the computer having
Connection
to USB input
1)
to RS-232
SRG series (when
Computer with USB
connecting to more
interface and LAN or
than one camera)
serial communication
2)
interface.
to LAN
AC power adaptor (supplied)
Power cord (supplied)
output from the camera. For detailed information on
how to set the video format, see " SYSTEM
SELECT switch" on page 7.
the USB3.0 terminal with the USB2.0 cable, a
message "this device can be executed at a higher
speed" may be displayed. It is no problem to close the
message.
to AC outlet