DIGITAL IF terminal
Convert the signal which meets the specifications above
into LVDS format (3.3 V power drive IC output), and
inputs the converted signal.
Note that the signal level cannot be recognized correctly
by the camera if it does not meet the following
conditions.
H level: 1.5 V to 1.7 V
L level: 0.8 V to 1.0 V
DVAL/Exposure output specific
(only DC IN terminal)
Stated in the voltage of when terminating at more than
10 k ohms
10
Location and Function of Parts and Operation
4 - 5 V
0 V