Connection With An S-Vhs Format - Sony DXC-325P Service Manual

TEEULPUTEP EEL
1. GENERAL Utourur | KAN
Connections
Before making connections, make sure that the power
switches of the camera and other equipment are turned off.
Connection with an S-VHS Format Portable
VTR
Set the OUTPUT selector on the camera adaptor to Y/C when
you connect an S-VHS format portable VTR.
The video signal output to CCQ camera cable is now the Y/C
separate signal.
The video signal output to the VIDEO OUT connector is stil!
the usual composite video signal.
S-VHS format VTR
When using a VTR which records with a composite video
signal next time, change the setting of the OUTPUT selector
to VBS.
DXC-325/325P
VTRICCUICMA an
ED yt
TCQ-BRS camera cable *
(supplied or optional)
*The camera cable can be extended
VIDEO OUT
up to 10 meters (33 feet).
When monitoring
the screen using
a video monitor
Video monitor
e Picture monitoring of the Y/C seperate signal is possible if
the monitor is equipped with the S video input jacks.
Connect the VTR and the S video input jacks of the
monitor. In this case, connection between the VIDEO OUT
connector of the camera and the monitor is unnecessary.
¢ Superimposed title characters (see page 46) do not appear
on the screen when the Y/C separate signal is output
through the CCQ-BRS camera cable. Connect a TGR-325
title generator (Optional) to the TITLE connector, and the
characters superimposed by the TGR-325 can be seen on
the viewfinder or the monitor connected to the VIDEO OUT
connector of the camera.
DXC - 325 (UC)
DXC - 325P (EK)