Setting Cooling Temperatures - Frigidaire LGUB2642LF2 Service Manual

Express-Select
(Non-Dispenser Models)
Figure 3-6. Express-Select™
User Interface for Non-Dispenser Models
User Interface Display Operation
™
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
quick ice Increases the production of ice
water fi lter Press and hold for three (3) seconds to reset after fi lter change.
C/F Touch to toggle display from Fahrenheit to Celsius.
default settings Resets all refrigerator settings such as temp, temp display and tones
to their factory default settings.
power on-off Press and hold for three (3) seconds to turn off the cooling system to
clean the refrigerator. It also turns off the ice maker. The temperature
displays will read OFF.
IMPORTANT
Pressing the system on-off icon does not turn off power to your refrigerator. You must
unplug the power cord from the wall outlet.

Setting Cooling Temperatures

Express-Select™ User Interface
Down (∨) and up (∧) indicators are located beside the displayed temperatures.
Press the down (∨) or up (∧) indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. After five (5) seconds
of inactivity, the display will beep to accept the new temperature. After 10 seconds, the
display times out and returns to the basic display.
3-4
Electronic Control