Controls; Frigidaire Gallery/Pro; User Interface; Setting Cooling Temperatures - Frigidaire FGHC2334KP - Gallery 22.6 Cu. Ft. Side Use And Care Manual

Frigidaire Gallery

User Interface

Your refrigerator is equipped with a user interface display.
It is only necessary to touch the glass. There is no need
to press with force.
Touch an icon to activate the desired dispenser mode.
The active dispenser mode is more brightly illuminated.
quick ice Increases the production of ice
(Gallery only)
quick freeze
Activates a faster rate for freezing
(Gallery only) food
power plus ice
Increases the production of ice
(Pro only)
power plus freeze Activates a faster rate for freezing
(Pro only) food
light on-off
On / Off
control lock
Press and hold for three seconds
to activate and deactivate. This
restricts undesired changes to the
refrigerators settings and prevents
use of the ice and water dispenser.
User Variable Options
Touching the options icon displays the following options:
water filter Touch to display filter condition status.
Press and hold for three seconds to reset.
air filter Touch to display filter status. Press and
hold for three seconds to reset.
display on-off
When active, it allows the display of
the freezer and fridge temps.
C/F Touch to toggle display from Fahren-
heit to Celsius.
default settings Resets all refrigerator settings such as
temp, temp display, and alarm tones to
their factory default settings.
power on-off Press and hold for three seconds to
turn off the cooling system to clean
the refrigerator. It also turns off all
dispenser functions. The temperature
display will read OFF.
Frigidaire Pro
IMPORTANT
Pressing the power off icon does not turn off power to
your refrigerator. You must unplug the power cord from
the wall outlet.

Setting Cooling Temperatures

Press the ∧ or ∨ indicator to adjust the temperature to
the desired setting.
The temperature display will begin to blink with the first
touch. After five (5) seconds of inactivity, the display will
beep to accept the new temperature.
Alarms
Door Ajar If the door has been left open for an
extended period of time greater than
5 minutes, an alarm will sound and
the door ajar indicator will display in
the middle. The alarm is turned off by
closing the door. The alarm off key will
illuminate to prompt the reset of any
pending alarms. Press this key to reset
any system Alarms.
High Temp
In the event of a high temperature
condition, the temperature display will
display "HI". After 20 minutes, the
high temp alert will be displayed and
the alarm off icon will illuminate until
pressed, acknowledging the alarm, at
which time the highest temperature
reached will be displayed and the
refrigerator will resume normal opera-
tion. All other modes are turned off
until the alarm is acknowledged.
Power Fail In the event of a power failure, the
power fail alert will be displayed and the
alarm off key will be illuminated and you
will hear an audible alarm until the alarm
off icon is pressed, acknowledging the
alarm. Other modes may be turned off
until the alarm is acknowledged. When
the power fail alert is turned off, the
refrigerator will resume normal opera-
tion. The high temp alarm may also be
illuminated until a safe operating range
temperature has been reached.

CONTrOLS

9