Setting Cooling Temperatures - Frigidaire FGHC2355PF Use And Care Manual

options
Used to enter and exit the
(∧ or ∨) options menu and make
selections.
exit Toggles the options and run
modes.
control While in the locked state,
locked
you will not be able to
change any settings on the
display nor dispense ice and
water. The "Control Locked"
indicator will flash and an
audible warning tone is
played.
light
Toggles dispenser light On
and Off.
quick
Activates a faster rate for
freeze freezing food. Deactivates
on off
after 12 hours.
quick ice Increases the production
of ice. Deactivates after 12
on off
hours.
display Toggles the temperature
on off
displays On and Off.
refrigerator Allows the temperature set-
temp
points to be adjusted. Control
temperatures range from
+33° F / +1° C to +47° F /
+8° C.
freezer
Allows the temperature
temp
set-points to be adjusted.
Control temperatures range
from -6° F / -21° C to +6° F
/ -15° C.
mode
Toggles display from Fahrenheit
° F ° C to Celsius.
power off
Press and hold for three
seconds to turn off the
cooling system. It also turns
off the ice maker and all
dispenser functions. The
display will read "power off".
water filter
Displays the current status of
the water filter (Good, Order,
or Replace). To reset the filter
status to "Good", press and
hold the "set" key for three
seconds.
air filter
Displays the current status of
the air filter (Good, Order, or
Replace). To reset the filter
status to "Good", press and
hold the "set" key for three
seconds.
default
While in the default option,
settings press and hold the set key
for three seconds to reset all
refrigerator settings to their
factory default settings.
set (+ or -)
Selects the current menu
selection option.
water
Press the "water" key
to select water. A green
indicator light will be
illuminated above the active
feature.
cube Press the "cube" key to
select cubed ice. A green
indicator light will be
illuminated above the active
feature.
crush
Press the "crush" key
to select crushed ice. A
green indicator light will be
illuminated above the active
feature.

Setting cooling temperatures


NOTE
When you first power on the refrigerator,
the temperature displays 0° F and 37° F.
After a few seconds, both of the displays will
switch to "HI". The displays will continue to
show "HI" for 20 minutes. After 20 minutes,
the High Temp alarm will sound and both
displays will show the actual temperature.
1 Plus (+) and Minus (-) indicators are
located on the right side of the control
panel.
2 Press the + or - indicator to adjust the
temperature to the desired setting.
CONTROLS
13