Avaya C360 Quick Start For Hardware Installation page 27

Table 4: Default Switch Settings
Function
Allowed protocols:
SNMP
Telnet
HTTP
Telnet
ICMP redirect
SSH
Telnet client
Recovery password
User Name/Password
Tip:
Functions operate in their default settings unless configured otherwise.
Table 5: Default Port Settings
Function
Duplex mode
Port speed
Auto-negotiation
Flow control
Flow control auto-negotiation
advertisement
Administrative state
Port VLAN ID
Tagging mode
Port priority
Quick Start for Hardware Installation: Avaya C360 Converged Stackable Switch
May 2004
Default Setting
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Enabled
root/root
Default Setting
Ports 1 to 24 or 48
Half/Full duplex depending on
auto-negotiation results
10/100 Mbps
Depending on auto- negotiation
results
*
Enable
Disabled (no pause)
Not applicable
Enable
1
Clear
0
Prepare for Configuration
Configuring the Switch
2 of 2
Ports 51 and 52
Full duplex only
1000 Mbps
Enable
Disabled (no pause)
Disabled (no pause)
Enable
1
Clear
0
1 of 2
21