Table of Contents
Advertisement
Handling Wireless Remote Control Unit
Loading the Battery (CR2025 lithium battery)
1
While pushing the lock in the
direction q
, slide the tray out ( w
from the back of the wireless
remote control unit.
About the Battery
• Remove the battery if the wireless remote control unit is not used for an extended period of time.
• When changing the batteries, use a CR2025 (3 V) lithium battery.
Note
• If the wireless remote control unit is placed face down, the buttons will be pressed and the projector will be put in
operation status, resulting in exhaustion of the battery. Be sure to store the remote control unit face up.
Caution
• To prevent the battery from exploding, replace only with the same or equivalent type recommended by the manufacturer.
• When disposing of used batteries, please comply with governmental regulations or environmental public institution's
rules that apply in your country/area.
Range of Use of the Wireless Remote Control Unit
Warning
• Do not disassemble or modify the wireless remote control unit supplied with the projector as this may result in
injury or failure.
2
Insert the battery, making sure
)
that the positive and negative
poles are correctly oriented.
q
w
3
Close the tray.
30°
30°
30°
30°
Within 5 m
13
Advertisement
Table of Contents
