Table of Contents
Advertisement
Basic Operation
Adjusting the Volume
(This function is performed only by the wireless
remote control unit.)
Press the VOLUME buttons
(
,
).
The adjustment screen is displayed.
Volume
Press
to increase the volume.
Press
to decrease the volume.
The screen is exited soon after completing
adjustment.
The factory default setting is 20.
Muting the Sound
(This function is performed only by the wireless
remote control unit.)
Press the MUTE button.
The sound can be temporarily muted by pressing
the MUTE button.
Note
• Press the MUTE button again to cancel muting
and return to normal status.
20
(continued)
Pointer buttons
ZOOM-PAN buttons
CANCEL button
20
POWER
AUTO
MUTE
MUTE button
MODE
ENTER
MENU
STATUS
ZOOM-PAN
VOLUME
KEYSTONE
CANCEL
VOLUME buttons
Partially Enlarging the Picture
(This function is performed only by the wireless
remote control unit.)
(This function is available only when RGB is selected
for the input source.)
1
Press the ZOOM-PAN buttons
(
,
Press
Press
original size.
The area can be enlarged 1 – 20 times (area ratio)
in 15 stages each time
2
Move the image to the area you
wish to watch using the pointer
buttons on the remote control
unit.
Note
• Press the CANCEL button to cancel partial
enlargement and return to normal status.
• The mode is canceled when the menu screen is
displayed or when the input source is switched.
).
to enlarge the image.
to return the enlarged image to its
is pressed.
Advertisement
Table of Contents
