To Video/Laser Disk/Dvd - Christie Vivid Lite User Manual

To Video/Laser Disk/DVD

AV equipment
[Projector Side]
To RGB/
COMPONENT
terminal
(used to connect
equipment with
component output
terminal)
(see below)
RCA-Dsub cable
(optional)
To Cr, Y, Cb
terminal (on
equipment with
component
output terminal)
Laser disk player
Note
• The cables marked with * are commercially available.
• When connecting the projector to equipment with stereo sound output, be sure to connect the L/R audio output or
stereo audio cable. When there is no image input (blue background screen), there will be no audio output.
Note on RGB/COMPONENT terminal connection
1. The component signal cable is a 15-pin mini D-sub ← → pin plug conversion cable.
2. For input of a component signal, select [On] in [Component Selection] on the DISPLAY menu. (See page 27)
IN
PUT1
S-VIDEO VIDEO
IN
PUT2
RGB/COMPONENT
To AUDIO terminal
(used to connect
equipment with
component output
terminal)
Stereo audio
cable*
To audio output
terminal
(on equipment
with component
output terminal)
15-pin mini D-sub Pin plug
← → R (Red)
Pin 1
← → G (Green)
Pin 2
← → B (Blue)
Pin 3
AUDIO
L R
AUDIO
To VIDEO & AUDIO
L/R terminals
(this connection
enables image and
sound output)
To video/audio
output terminals
Video deck
To S-VIDEO terminal
(used to connect
equipment with S
Video output terminal)
AV cable
(supplied)
To S Video
output terminal
DVD player
S terminal
cable *
17