Maintenance And Care - Christie Vivid Lite User Manual

Maintenance and Care

About the ventilation holes
• If the ventilation holes become blocked, the temperature inside the projector rises and the lamp will fail to light. Clean the
ventilation holes about once every 6 months. Cleaning will be required more frequently if used in a particularly dusty
environment.
• When the air filter of the ventilation hole becomes hard to clean, it is ready to be changed. Purchase a new air filter (with
the filter holder).
Cleaning the ventilation holes
1
Unplug the power cable from
the socket.
2
Clean the ventilation holes.
Use a vacuum cleaner with a soft brush attached.
Note
• Do not use a vacuum cleaner with a hard
attachment or without an attachment, as this
may damage the projector.
Ventilation holes
Replacing the air filter
1
Remove the filter holder from
the projector.
Remove the filter holder from the right side of the
projector.
2
Fit a new filter holder in the
projector.
Insert the catch on the filter holder and press it
clicks into place.
Take care not to break the
clasp on the filter holder.
IN
PU T1
S -V ID E O
V ID E O
A U D IO
L
R
IN
PU T2
R G B /C O M
P O N E N T
A U D IO
IN
PU T1
S -V ID E O
V ID E O
A U D IO
L
R
IN
PU T2
R G B /C O M
P O N E N T
A U D IO
29