Handling The Wireless Remote Control Unit - Christie Lcd projector User Manual

Handling the Wireless Remote Control Unit

Loading the Batteries (2 size AA batteries)
1
Open the battery cover on the back
of wireless remote control unit in the
direction shown.
About the Batteries
• Remove the batteries if the wireless remote control unit is not used for an extended period of time.
• When changing the batteries, use alkaline batteries. Use two new batteries of the same type. (The batteries supplied are for
checking functions.)
• Dispose of used batteries in accordance with local recycling and waste disposal ordinances.
Note
• If the wireless remote control unit is placed face down, the MOUSE button will be pressed and the projector will be put in
operation status, resulting in exhaustion of the batteries. Be sure to store the remote control unit face up.
• Do not use batteries other than those specifically recommended for the wireless remote control unit to prevent the batteries
from exploding.
Opening and Closing the Wireless Remote Control Unit
Open and close the cover of the wireless remote control unit as shown below.
Range of Use of the Wireless Remote Control Unit
2
Insert two size AA batteries,
making sure that the positive and
negative terminals are correctly
oriented.
Open
Within 10 m (11 yards)
30°
30°
3
Close the battery cover in the
direction shown.
Close
Within 10 m (11 yards)
30°
30°
13