Christie VIVID Red Replacement Instructions

Lamp Replacement Instructions
When the lamp reaches the end of its service life, the image will become
darker and colors lose their richness. When the lamp has been operating for
1400 hours or longer, the lamp status LED indicator will flash green, and the
message "The lamp is reaching its limits. Please replace the lamp as soon as
possible" will be displayed on the screen. Even though the lamp may still be
working, replace the lamp to maintain optimal projector performance. When
the lamp has been operated for 1500 hours, the message " LAMP
EXPIRED!!" will be shown on the screen, replace the lamp immediately.
CAUTION
DO NOT TOUCH THE LAMP immediately after it has been used. It will be
extremely hot. Allow the fan to finish its cooling process, then turn the
projector off, and disconnect the power cord. Allow at least
the lamp to cool down before handling.
DO NOT REMOVE ANY SCREWS except the lamp cover screw and two
lamp housing screws. Removing other screws could result in electric
shock to the user.
If continuing to use the lamp after the replacing lamp message has been
displayed on screen, the lamp bulb may shatter, and pieces of glass
may scatter inside the projector and out into the room. Do not touch
them as the pieces of glass may cause injury. If this happens, contact
your dealer for lamp replacement.
VIVID Red
one hour for